Octane Fitness zr8000, Setup Instructions

5

USER (CLUB) SETTINGS

Many of the standard features and controls of Octane Fitness units can be customized to fit your personal 
preferences or workout environment. In just a few simple steps, you can set up the machine to skip the Warm-Up, 
count down your workout time (instead of counting up), limit the maximum workout time, display units in English or 
metric, mute the console beeps and more All of these adjustments are easily completed and are saved as the new 
standard for the machine—you don’t need to reset them for each use.

To access the User Set-up functions, press and hold 

Program Workout (+)

 and 

Quick Start

 for three-five seconds, 

or until you hear a beep. The following customizable functions are displayed in sequence in the LCD; use the Enter 

key to toggle through the available options (shown in the matrix display) for each function, and press Program 

Workout Up (+) or Down (–) to select a setting and move to the next function. To exit without changing any values, 

press Pause Clear twice.

Warm-Up

This feature may be turned “ON” (to include a 3-minute warm-up in each workout) or “OFF”. 
The factory default setting is “OFF”. 

Clock Direction

The console can track workout time by counting “UP” or “DOWN”. The factory default 
setting is “UP”.

Max Workout 

Time

You may set the maximum workout time for users to the value that is best for your environment. 

The factory default setting is “OFF”, allowing users to use the machine for as long as they 

would like without reset. Press the Enter key one time to move from”OFF” to ten minutes 

(10:00) , then press and hold ENTER to scroll to any value between ten miniutes (10:00) and 

99 minutes (01:39). (The setting rolls back to “OFF” if you scroll past 99 minutes). Press the 

Up (+) or Down (–) key to save the value you desire.

Default 

Workout Time

Default Workout Time governs the standard value that users see when they program a workout 

with a ‘time’ setting. The factory default setting is 30:00 (30 minutes). Default Workout Time 

may be set to any value between ten minutes (10:00) and the current Max Workout Time 

setting. If Max Workout Time is set to “OFF”, Default Workout Time is 99 minutes (01:39). 

Press and hold ENTER to scroll through in one-minute increments  to the value you want, then 

press the Up (+) or Down (–) key to save the value you desire.

Unit Type

You may choose to have the weight and distance units displayed in “ENGLISH” (pounds and 
miles) or “METRIC” (kilograms and kilometers). The factory default setting is “ENGLISH”. 

CROSS 

CIRCUIT

Select “OFF” to disable the two CROSS CiRCUIT Pro programs (for use with the optional 
CROSS CiRCUIT Pro Kit). Factory default is “ON”.

Beep

You may turn the console sounds “ON” or “OFF”. The factory default setting is “ON”.

ID

If you have more than one Octane Fitness unit on site, use this setting to give each a unique 
identification number for pairing with a mobile device. Choose any value between 0 and 127. 
The factory default setting is 1.

Exit

When EXIT is displayed in the LCD, press Enter to leave User (Club) Settings. All of your 
selections will be saved and become the new standard settings for your machine. They may 
be changed at any time by repeating these set-up procedures.