11
Fusion DIY Enclosure User Guide
Installation of the Fusion DIY Enclosure
8. Align the metals struts of the bracket with the metal plates located on top of the Fusion jukebox as you slide
the enclosure into place. The following shows the position of the bracket on the Fusion jukebox chassis
without the enclosure as a visual example only.
Position of bracket on bare Fusion jukebox
9. Make sure that the striker bracket located at the bottom interior of the assembled bracket/enclosure connects
with the rotary latch on the front of the Fusion jukebox. The bill acceptor slots must align with the slots
(openings) on the assembled bracket/enclosure.
10. Locate the three wing bolts (P/N 200302-001) provided with the Fusion Accessory Kit.
Wing bolts from the Fusion Accessory Kit