25
8. REMOTE CONTROL
Changing the batteries
1. Remove the bottom plate (three screws size 3 x 8 Phillips countersunk head screw) with
screwdriver Phillips 1
2. Change the batteries (2 x type AAA 1.5 V alkali-manganese / alkaline)
Please take care not to push the buttons of the remote control while inserting the new
batteries.
If it still happens that the remote control does not work after changing the batteries,
remove the new batteries and wait for the minimum of 30 minutes. After half an hour you
can insert the new batteries again and the remote control should work.
3. Mount the bottom plate again; tighten the screws not too hard.
Please don’t trash the old batteries. Batteries must be disposed of as special waste. Stores
that sell batteries should provide containers for the collection of used batteries.
Volume up
Volume down