101–1477–001
Edition 2
SYSTEM UTILITIES AND
PROCEDURES
Overview
This chapter includes information about the following new utilities, procedures, and hardware
introduced with Aria 1.2 and used by service personnel:
-
FLT-A card for Lucent Technologies (formerly AT&T) integration with the Octel
Overture 250. Removal and replacement of the FLT-A card is described in this section.
-
Conversion of a Branch, Aspen, or Maxum to an Octel Overture 250, using the tape drives in
a special PC and in the 250.
-
Conversion of an Octel Overture 250 at Aria 1.2 to an Octel Overture 350 at Aria 1.2.
-
New Port Traffic Statistics utilities.
-
Mixed 1-GB, 2-GB, and 4-GB message drives and the new Upgrade Message Drive utility.
-
New Reset Mirrored Drive Status utility.
-
New Collapse Nodes utility.
-
Revised Enable Drive utility.
-
Revised Replace System Drive utility.
3