The system starts saving two 30 seconds block videos at the startup. If nothing is recognized as a
possible event these two blocks are owerwrited with new data. If an event is recognized (g-sensors
thresholds are exceeded or a mual activation through the Emergency rec button) video blocks are saved
and marked as an event. Also the following block will be marked as event. So in case of event
OCTOBOX
4V VEDR
will save three 30 seconds video block: the one where the event took place, the previous one
and the
following one, obtaining 90 seconds recording.
These tree block are saved separately to let the user a more flexible usage.
Using an 8Gb microSD it's possible to record up to 6 hours recording.
To avoid accidental overwriting of an important event it's necessary to shut down the sistem or remove
the micro SD card from the device.
It is recommended transferring important information as soon as possible to the PC using SD flash card.
The software ECO Ved Player lets you perform all the functions necessary for the management of the
data contained in micro SD memory card.
2.2.1.1 Event automatic assertion
V.E.D.R. system, analyzing the G sensor data during the travel, can recognize automatically the 'event'
condition.
When the vehicle is involved in an impact or, in specific conditions where g-sensor collected data
exceedes the threshold setted on the three axis,
OCTOBOX 4V VEDR
asserts the 'event' condition and
starts the recording procedure.
The threshold value setted on the three axis can be modified from the control panel to adapt the device
to the vehicle.
This classification let handle the different type of event:
If the maximum number of recorded events it's reached the new incoming events will overwrite the
elder one.
If an event is correctly recognized and record the system assumes this status:
Automatic event recording:
Led REC starts blinking 1 time per second
End of automatic recording:
Led REC starts blinking one time each 5 seconds.