6 Gallon System Includes:
6 Gallon Hydro Reservoir Base & Lid, Hydro Wick, Standard Gro
Sleeve, Depth Gage, & 4 Caps
Control Reservoir
Install Float Valve into Hydro Reservoir:
Insert Float Valve with one rubber washer on the inside of the Hydro Reservoir side
wall.
Adjust the position of the Float Valve making sure that it will rise straight up to shut
off.
Tighten nut firmly after positioning the Float Valve.
Connect the 1/2" Adapter to the outide of the float valve.
Install a 1/2" (or 3/4") bulkhead in the lower hole on your control reservoir
**The OctoBuoy was discontinued in 2021
replaced by an adjustable float valve
Control Reservoir Includes:
3 Gallon Hydro Reservoir Base, with pre-drilled holes,
1/2" adjustable float valve, & (1/2" bulkhead, 1/2" shut
off valve, & 1/2" tubing) for external storage
connection.
see auto-fill plumbing for external connection instructions