15
USER MANUAL
Recharging the robot
To recharge the robot, install the charger. The battery may be uncharged when the robot is received.
Charge it fully before using it.
To charge the robot.
1)
Plug the charger into a wall outlet.
2)
Connect the charger to the robot.
Charging the battery
Whenever the robot is charging, an
ORANGE indicator light appears on the charger. Whenever the battery reaches
a charge level of 90 to 95% of its total capacity, the indicator turns YELLOW, the battery is almost full, and the robot can
be used. Whenever the charger’s indicator light is GREEN, the battery is fully charged.
About the battery
The T-Moov robot is powered by a rechargeable Li-ION battery.
The battery’s warranty period is 12 months from the date of purchase.
This battery is intended only for robots from OCTOPUS BIOSAFETY. It is strictly prohibited to use it with other devices
or for other purposes.
-
Do not disassemble and/or modify the battery.
-
Never put the battery near a source of heat.
-
Do not connect any metal objects to the terminals (+) or (-) of the robot’s connector (or battery)
-
If the battery is no longer working, do not disassemble the robot. Call the customer service center at
+33 (0)2 90 38 01 83.
-
If the battery is taking longer to charge and draining faster, this means that it is reaching its end of life.
Contact the customer service center.
-
The rechargeable battery built into the product cannot be replaced by the user. Contact the customer
service center to have it replaced.
-
Follow local regulations for recycling used batteries.
3
Summary of Contents for T-MOOV
