Basics
3
www.ocularrobotics.com
Ocular Robotics Ltd
2.2
What You Need
In order to operate the RE08 laser scanning system, you will need:
1.
Power supply – A 24 volt DC power supply with 25 amp surge current capability and
a continuous current capacity of 10 amps is recommended
2.
Ethernet cable – A standard Ethernet cable (Cat5e or Cat6) is needed for control and
communication with the RE08 system.
3.
A computer with a Windows or Linux operating system with an available Gigabit
Ethernet port.
2.3
Handling and Transportation
Avoid handling the RobotEye using the dome. Doing so may result in damage to the
dome, reducing optical performance.
When transporting, make sure the RobotEye dome will not be subject to large external
loads, stresses or impacts.
Figure 2-2 – RE08 Handling Zones