EX Series Operating Manual
1-3. Inspecting the Unit.
When you receive your power supply, inspect it for any obvious damage that may have
occurred during shipment. If any damage is found, notify the carrier and the nearest ODA
Sales Office immediately. Warranty information is shown in the front of this manual. Keep
the original packing materials in case the power supply has to be returned to ODA
Technologies in the future. If you return the power supply for service, attach a tag
identifying the owner and model number. Also include a brief description of the problem.
Mechanical Check
▌Check the broken key, encoder switch, power switch.
▌Check the panel surfaces are free of dents and scratches.
▌Ch
k th b k
t
t t
i
l
▌Check the broken rear output terminals.
▌Check the cabinet is free of scratches.
▌Check the LDC display is not scratched or cracked.
Electrical Check
▌When turning on the power, check the alarm sound.
If the alarm sounds, the instrument has the error during self-testing itself.
Error checking, press the error key and conform error code.
More information about error code, refer to “7.Error Messages”.
About Self-test, refer to 『1-6. Check after Power On』.
▌Check the model Number is matched with displayed model number.
▌Aft
it h w "**OUTPUT OFF**"
v ifi
t
hi h l v l f
fid
▌After, it shows "**OUTPUT OFF**" message, verifies to a high level of confidence
that the power supply is operating in accordance with its specifications.
Service Center : 82-32-623-5454
Home page : www.odacore.com
Note
p g
1-4. Installation and Operating Conditions
This instrument is designed for following environmental conditions in other to use
optimized condition
▌E
i
t l T
t
0
40℃
▌Environmental Temperature : 0 ∼ 40℃
▌Relative Humidity :
≦
80
﹪
RH
▌Operating altitude : <2000m.pollution degree Ⅱ
▌No vibration.
▌Avoid the electricmagnetic field.
- 12 -
