EX Series Operating Manual
FACT:LAST-STA {DIS|SAF|FUL}
When you turn on the power supply, you can select the default state of output DC power.
> DIS
When selected this mode, boot the power supply to original default value.
> SAF
When you turn on the power supply, appears "OUTPUT OFF" display.
But if you press the "OUTPUT" key, recall the last state voltage/current
value.
> FUL
Recall the state before you turn off fully.
ex) fact:last-sta saf
Set the safetymode.
FACT:LAST-STA?
Confirm the Last-state value.
Return value
"DISABLE"
"SAFETY"
"SAFETY"
"FULLY"
ex)fact:last-sta?
return value "SAFETY"
FACT:AUTO-CUR {DIS|ENA}
If the power supply doesn't receive any operation by using front-panel within a certain period
of time, the power supply's cursor location go down to minimum changing unit automatically
,
p
pp y
g
g g
y
when you set the "AUTO CURSOR MV" mode is enable.
> DIS
Disable "AUTO CURSOR MV" mode.
> ENA
Enable "AUTO CURSOR MV" mode.
ex) fact:auto-cur ena
Disable "AUTO CURSOR MV" mode.
FACT:AUTO-CUR?
Confirm the auto cursor value
Confirm the auto cursor value.
Return value
"0"
Disable state
"1"
Enable state
ex)fact:auto-cur?
return value "1"
FACT:AUTO-LOC {DIS|ENA}
If the power supply doesn't receive any operation by using front-panel within a certain period
If the power supply doesn t receive any operation by using front panel within a certain period
of time, the power supply becomes the key lock state automatically when you set the
"AUTO KEY LOCK" mode is enable.
> DIS
Disable "AUTO KEY LOCK" mode.
> ENA
Enable "AUTO KEY LOCK" mode.
ex) fact:auto-loc ena
Set the auto lock function.
FACT:AUTO-LOC?
Confirm auto key lock value.
Return value
"0"
Disable state
"1"
Enable state
ex)fact:auto-loc?
return value "1"
- 94 -
