Stability
When load leadline is long and contains a lot of capacity, it can lead to a problem using V-s
It will act like a filter on a part of voltage feedback roof which is problem on sensing.
This will decrease the liablity of power supply, and voltage terminal supply could be instable
Also this un reliable roof will be feedback to lead to power supply's erruption
Also, this un-reliable roof will be feedback to lead to power supply's erruption.
To decrease these probablity, please follow steps below :
▌Connect Load & Sensing leadline as short as possible.
▌twist Load leadline to use.
▌Sensing leadline should be connected to load safely.
▌Do not connect load leadlines to sensing terminal.
Remote Voltage Sensing Connection
Connect V-Sensing carefully ch,- from coutput terminal to load.
If you connect load with sensing terminal, it can turn to unregulated condition, and its very
dangerous that voltage & current can be different from displaying value.
To connect V-Sensing, please take out metal short-bar, and put it back on
if V-Sensing is not using.
Note
< Diagram 3-1 >
- 25 -