3-11. V/I & LMT DISPLAY
Shows voltage and current limit values on the display and allows knob adjustment
for setting limit values. Also you can choose between voltage limit set or current limit set.
V/I Function
▌Power Switch ON
After turning on, please check "
**OUTPUT OFF**
" is displayed.
▌To set up voltage & current limit, press OUTPUT ON/OFF Key.
▌Cursor will blink to voltage. When it is blinking, press V/I to move
it to current side.
it to current side.
▌To move back to voltage side, press V/I Key once more.
LMT DISPLAY Function
▌P
S it h ON
▌Power Switch ON
After turning On, please check "**OUTPUT OFF**" is displayed.
▌To display voltage, current limit, press OUTPUT ON/OFF Key.
▌Wait for 2.5 seconds approximately, when the blinking cursor disappears,
press LMT DISPLAY Key
press LMT DISPLAY Key.
▌Return back to Limit Display condition after blinking
▌Press LMT DISPLAY Key once more to move back to V/I Selection.
1. If you turn encorder switch while cursor is blinking, Limit Display will be last. While cursor is not blinkin
turn to ReadBack Display.
2 When you press cursor key while blinking Limit Display will be last While cursor is nott blinking
Note
2. When you press cursor key while blinking, Limit Display will be last. While cursor is nott blinking,
turn to ReadBack Display.
- 39 -
