7-6. Error from Non-volatile memory check.
Before sailing, our product records error message in non-vertile memory.
-80, "Memory limit volt error"
There is an error with voltage value
There is an error with voltage value.
-81, "Memory limit curr error"
There is an error with current value.
-82, "Memory max volt error"
There is an error with maximum voltage value.
-83, "Memory max curr error"
There is an error with maximum current value.
-84, "Memory volt decimal error"
There is an error with voltage decimal point.
-85 "Memory curr decimal error"
-85, Memory curr decimal error
There is an error with current decimal point.
-86, "Memory volt length error"
There is an error with voltage digit length.
-87, "Memory curr length error"
There is an error with current digit length
There is an error with current digit length.
-88, "Not match volt length and limit"
Voltage value and digit length does not match.
-89, "Not match curr length and limit"
Current value and digit length does not match.
7-7. Interface Commands Error
Informs you about panelling using PC Interface.
-120, "Suffix too long"
Maximum memory buffer is 50byte. This error occurs when it is more than 50byte.
-121, "Invalid data"
This error occurs when there is letters or invalid data.
ex) volt 10V
'V'' is added
fix) volt 10
- 78 -
