background image

IMPORTANT SAFEGUARDS

Read all instructions before using this heater.
Extreme caution is necessary when towel warmer is 

used by or near children or persons with reduced 

physical, sensory or mental capabilities and  

whenever the heater is left operating unattended.
The device is designed only for drying textile 

washed in water.
The heater should be installed at a minimal distance 

of 0,6 meter of a bathtub or a shower.
If the supply cable is damaged, it should be 

replaced by the manufacturer, manufacturing agent 

or any qualified person to avoid potential dangers.
Always unplug heater when not in use.
Do not operate the heater with a damaged cord or 

plug or if the heater has malfunctions, has been 

dropped or damaged in any manner. 
Return heater to authorized service facility for 

examination, electrical or mechanical adjustment, 

or repair.
Do not use outdoors. 
Never place the heater where it may fall into a 

bathtub or other water containers.

Do not run cord under carpeting. Do not cover 

cord with throw rugs, runners, or the like. Place the 

cord away from traffic area and where it will not be 

tripped over.
Do not insert or allow foreign objects to enter any 

ventilation or exhaust opening as this may cause an  

electric shock, fire or damage the heater. 
Do not use it in area where gasoline, paints, or 

flammable liquids can be found. 
Use this heater only as described in this manual. 

Any other use is not recommended by the manu-

facture.It may cause fire, electric shock, or injury to 

persons. 
Keep these instructions for later reference. 

CAUTION: 

THIS HEATER ONLY OPERATES IN UPRIGHT 

POSITION. 
STORE THE HEATER IN COOL and DRY LOCA-

TION WHEN NOT IN USE.
DO NOT STORE UNTIL THE HEATER HAS 

COOLED DOWN. 

ANY OTHER SERVICING SHOULD BE PERFOMED 

BY AN AUTHORIZED SERVICE REPERSENTATIVE
THE HEATER MUST NOT BE LOCATED IMMEDIA-

TELY BELOW A SOCKET- 

OUTLET.
This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervi-

sion or instruction concerning use of this appliance 

by a person responsible for their safety. Children 

should be supervised to ensure that they do not 

play with the appliance.

PRODUCT MAINTENANCE

To keep the device clean, regular maintenance is 

suggested. 
To remove dust, use a soft cloth. 
To remove a stain, dampen the cloth. For better ef-

ficiency of the device, it is advisable to remove dust 

and foams which can accumulate regularly. Never 

use abrasive or acetone-based products.

LIMITED WARRANTIES 

Odass warrants the product to be free from defects 

in workmanship from the date of purchase. These 

warranties extend only to the original owner/end-

user for personal household use and start from the 

date of purchase/billing.This warranty cannot be 

transferred to a third party and additional limitations 

apply for commercial uses. In the eventuality that a 

ma-nufacturing defect appears, the owner/ enduser 

must have in his possession, a proof of purchase 

as well as a proof of installation by a professional 

recognized by the construction industry.Odass 

reserves the right to inspect on site, the defect by a 

repre-sentative of is choice. Any return of goods will 

not be accepted without the written authorization 

from Odass. Odass cannot be held responsible 

about the defects or breakingresulting from any act 

of god, accident, catastrophe, abuse, negli-gence, 

improper installation/use/maintenance, intensive 

variation of temperature, exposures to chemicals 

or stains caused by diffe-rents types of water 

such as ferrous or alkaline water, etc.The use of 

abrasives of any kind, gritting scraper, brushes 

or any other scouring object which can damage 

the surface of the pro-duct is to be proscribe and 

will cancel the present warranty. Odass will be 

repaired or replaced (with a product of equal value) 

to her discression of any product reported to the 

authorized dealer or to Odass as being defective 

within the warranty period. Neither the distributor, 

authorized Odass dealer nor any other person has 

been authorized to make any affirmation, repre-

sentation or warranty other than those contained 

in the warranty; any affirmation, repre-sentation or 

warranty other than those contained in this warranty 

shall not be enforceable against Odass or any 

other person.This warranty excludes any expenses 

related to shipping, handling and/or installation 

fees. Odass cannot be held responsible for the fees 

of labor, wastes of time, expenses of sundries or 

replacement of installation material, including, but 

not limited to, tiles, marble, etc.Odass reserves the 

right to modify this warranty at any time, it being 

understood that such modification will not alter the 

warranty condi-tions applicable at the time of the 

sale of the products in question.

LIMITED WARRANTIES 

Odass guarantees the chrome and brushed finish 

of stainless steel products for a limited lifetime 

and a 5 years warranty on the matt black finish of 

stainless steel products to be free from defects 

in workmanship and materials under normal use 

and service from the initial date of purchase by the 

owner/end-user, contractor or builder.Odass gua-

rantees all material made of solid surface «I-stone» 

for a limited lifetime to be free from defects in work-

manship and mate-rials under normal use and ser-

vice from the initial date of purchase by the owner/

end-user, contractor or builder.Odass warrants for 

a period of 10 years, acrylic unit to be free from 

defects in workmanship and materials under normal 

use and service from the initial date of purchase by 

the owner/end-user, contractor or builder.Odass 

warrants for a period of 10 years, shower doors to 

be free from defects in workmanship and materials 

under normal use and service from the initial date 

of purchase by the owner/end-user, contractor or 

builder.Odass warrants for a period of 5 years, sa-

nitary porcelain products (toilet, lavatories basin) to 

be free from defects in workmanship and materials 

under normal use and

Entretiens-garantie limitées soient dans trois 

colonnes comme les chauffe-serviettes. Toutes 

mêmes grosseurs et même typo que les manuels 

des chauffes-serviettes.

service from the initial date of pur-chase by the 

owner/end-user, contractor or builder.Odass war-

rants for a period of 2 years, storage modules and 

va-nities to be free from defects in workmanship 

and materials under normal use and service from 

the initial date of purchase by the owner/end-user, 

contractor or builder.Odass warrants for a period 

of 2 years, glass mirrors to be free from defects 

in workmanship and materials under normal use 

and service from the initial date of purchase by 

the owner/end-user, contractor or builder.Odass 

warrants for a period of 2 years, electrical com-

ponents to be free from defects in workmanship 

and materials under normal use and service from 

the initial date of purchase by the owner/end-user, 

contractor or builder.

Summary of Contents for OD-1010






Reviews: