30
ODB COMPANY
800-446-9823
SKB700
Operating Section
3.2 Engine Controller-Installation Cont.
Panel Throttle Settings
A number of panel settings are available in different Controls, Inc. panels. It is important to
check the throttle settings during installation. Basic settings for minimum speed, maximum
speed and ramp rate should be reviewed for a manual start situation. For an auto start situation,
other settings for warm up speed, operating speed and cool down speed should be reviewed.
Interlock Settings
Interlock settings provide the ability to turn relay outputs on and off based on conditions like
engine speed or engine run. They are typically used for clutch engage/disengage or to turn on/
off other devices when required during equipment operation. These settings need to be reviewed
during installation
Stored engine ECU codes can be viewed in the Stored Codes menu. The panel displays are codes cur-
rently stored on the engine ECU.
Alarm Log
All alarms and shutdowns are added to the control panel alarm log. The alarm log maintains the
last 32 alarms and faults. Each event is logged with the engine hour reading at the time of occur-
rence. This provides a history of alarms and shutdowns for mechanical engines that is valuable
for service and troubleshooting.
Summary of Contents for SKB700
Page 35: ...35 ODB COMPANY 800 446 9823 SKB700 Operating Section...
Page 36: ...36 ODB COMPANY 800 446 9823 SKB700 Operating Section...
Page 37: ...37 ODB COMPANY 800 446 9823 SKB700 Operating Section...
Page 138: ...138 ODB COMPANY 800 446 9823 SKB700 INDEX Volt Meter 76 W Water Temperature Sender 82...
