65
ODB COMPANY
800-446-9823
SKB700
Service Section
Review the safety section of this manual before attempt-
ing these procedures.
Thoroughly read and understand the safety and
pre-operating sections of this manual before work-
ing on the unit.
figure 5.2d
Install the belt by reversing the previous proce-
dure.
If the belt needs to be adjusted more, loosen the
1/2" nut on the engine adjuster bolt (item A figure
5.2a) and "fine tune" the adjustment using the
large nut (item B Figure 5.2b). Be careful to keep
the engine level.
Installing the Drive Belt (refer to 5.1a thru 5.1d):
1.
2.
Make sure the negative battery cable is discon-
nected before opening the blower housing.
figure 5.2b
After adjusting the engine height using the
large nut, tighten down the 1/2" nut (Item
A, figure 5.2b).
3.
Engine Mount
Adjuster
Engine Mount
Adjuster
figure 5.2c
Engine Cam
Nut Adjustment
A
B
A
B
5.5 Replacing the Drive Belt (if equipped)
Summary of Contents for SKB700
Page 35: ...35 ODB COMPANY 800 446 9823 SKB700 Operating Section...
Page 36: ...36 ODB COMPANY 800 446 9823 SKB700 Operating Section...
Page 37: ...37 ODB COMPANY 800 446 9823 SKB700 Operating Section...
Page 138: ...138 ODB COMPANY 800 446 9823 SKB700 INDEX Volt Meter 76 W Water Temperature Sender 82...
