Oden Control P220L, User Manual

www.odencontrol.se 17

10 TIPS 

−

If you have any control problem, please go to chapter Trouble shooting. If you still have problem contact 
Oden Control AB or your nearest dealer. 

−

All parameter settings in OVP are stored in a permanent memory in the electronics. That means that your 
settings will not be affected if the electronics is upgraded with latest software version at service. 

−

Note that maximum range for the automatic permanent saving of the position value at a power break is 
12,000 degrees (33 turns) for turning actuators and 330 mm (with a screw pitch of 10 mm) for linear 
actuators. 

If the limit of the working range has been exceeded no saving occurs. To maintain the calibration point 
for an extended working range, you will need to continuously power the actuator, for example by an UPS 
(Uninterrupted Power Supply). 

−

There are options concerning other types of spindle adapters. Tapered clamping sleeves are alternatives to 
the traditional method. These sleeves make the installations quicker and easier. Please ask for more 
specific information.  

−

There are options concerning different types of turning and linear units which are not mentioned in this 
manual. Please ask for more specific information. 

−

Visit our website 

www.odencontrol.se

 for more information, software and documentation. 

Oden Control AB 

Herserudsvägen 5 

181 34 Lidingö 

Sweden 

Phone:  

(+46) 8 767 76 57 

Fax:  

(+46) 8 767 04 17 

E-mail:  

oden@odencontrol.se

Web:  

www.odencontrol.se