REVIEW THIS INFORMATION PRIOR TO BEGINNING INSTALLATION
caution:
• The tubular skylight is not designed to hold your
weight or the weight of tools or other objects.
Walking/placing objects on the skylight could
cause personal injury and property damage.
A damaged skylight should be repaired
immediately.
• For safe installation and use, do not deviate
from these installation instructions.
warning:
Working on a roof is potentially dangerous but
you can significantly reduce the risk by following
these precautions:
• Never work in wet, windy or cold conditions.
Roofing materials can be slippery when wet;
asphalt shingles are brittle when cold and may
crumble underfoot. Plan your installation for
a pleasant, calm, dry day.
• Wear shoes with slip-resistant soles.
POTENTIAL FIRE HAZARD.
After removing
film lining from interior of tube shaft,
DO NOT
leave tube shaft components unattended
and exposed to direct sunlight.
Exposed surfaces may catch fire or
incur heat damage until tube shaft
is properly installed. Assembly and
installation of tube shaft and attachment of the
inner diffuser eliminates potential hazards from the
reflective inner surface.
safety information:
• Wear safety glasses and work gloves when
using power tools.
• Use protective work gloves while handling tube
sections to protect hands from sharp edges.
tips:
• Consult your local building official about local
construction ordinances before starting your
installation.
• Consult your community covenants.
Some subdivisions may not allow tubes on the
street side of the home.
• Before installation, carefully survey the attic area
of desired location, roof valleys, ceilings, and any
ceiling-mounted registers or fans.
• Make careful note of the location of wiring,
plumbing and mechanical attic equipment.
• For best results in colder climates, the tube
shaft should be insulated in the attic space.
• For best results always attempt to install the
tube as straight as possible.
• The molded (
N
) on the Solar Lens™ Dome
should face north for optimum performance.
determining roof pitch:
• “Roof Pitch” is how far the roof drops vertically
for every 12” of horizontal run.
• Asphalt roof applications require a minimum
pitch of 3:12 and a maximum of 12:12.
12
X
Solar Flair 14" Tubular Skylight
W h a t y o u n e e d t o k n o w
These instructions have been designed to help install your Solar Flair™ Tubular Skylight easily and safely. We’ve included
a parts list, list of tools required, installation instructions for a variety of ceiling types, handy tips, and safety precautions.
Please read these instructions thoroughly before installing your Solar Flair™ Tubular Skylight. Pay particular attention to
the assembly diagrams, assembly order, and part names. Identify and organize all parts before assembly. Make a list of
the tools and components you will need for each installation location. Following these instructions carefully will greatly
enhance your ability to install your tubular skylight and enjoy flawless performance for many years.
2
pitch =
X
⁄
12
