ODSIF Luxury roller blind system, User Manual

13

7. How to code ODSIF wireless switch

7.1 How to use ODSIF wireless switch

8. Trouble shooting  

Problem: 

After connecting to power, the motor does not work or runs slowly.

Matter:   

a. Connected to wrong voltage

  b. 

Overloading

c. Wrong installation leads to motor stucking.

Solution: 

a. Change to matched voltaage

b. Choose suitable motor torque

c. Check the components

Problem: 

The motor stops suddenly during working

Matter:   

a. The motor has exceeded the overheating protection

b. The power was cut off

Solution: 

a. After cooling down, the motor will work again

b. The motor will work again once the power is on

HOW TO CODE WALL SWITCH

TROUBLE-SHOOTING

Press the program  
button on the tube 
for 1 s.
(use a sharp pin or 
similar for this)

The motor jogs 
once.

Press the up 
button on the 
switch (the right 
side of the bush 
button)

The motor jogs 
once, and now the 
switch has been 
programmed. The 
switch can now be 
used to operate the 
blinds.

Press the left 
side of the but-
ton to close the 
curtain.

Press the right  
side of the but-
ton to open the 
curtain.

Press both sides 
of the button to 
stop the blind in 
any position.