All Rights reserved, including possible patents or trademarks. Documents shall not be provided to a third party or duplicated in any form without prior written permission.
This document is not managed
010.650.001.000.001-a
2
ODU AMC
®
HIGH-DENSITY
BREAK-AWAY PLUG
ASSEMBLY INSTRUCTION
2 Cable Preparation
The following table provides recommended guidelines for cable preparation.
The according stripping measures have to be checked before assembly!
All dimensions in mm
Tolerance: +10 %
Exceptions are noted on special instructions.
Notes for data-rate-connectors
Before soldering, twist the strands back slightly in the original direction. If a shield is
available for the separately pairs of wires (e.g. STP-Cables), wrap it around the pairs as far
as possible.
Size
Contact
∅
L
A
S
00
0.3
10
1.5
10
0.5
8
1.5
8
0
0.3
10
1.5
10
0.7
10
1.5
10
1
0.3
12
1.5
12
1.5 (A)
0.3
14
1.5
14
Cable
Shield
Insulation
Single Conductor
A = Stripping length single conductor
L = Stripping length cable jacket
S = Stripping length braided shield
