www.odu.de
E
F
B
C
D
ODU MINI-SNAP Series L, K, B
Page 3
010.014.000.000.000
Assembly Instructions
5. Bend cable shield outwards,
assemble half-shells.
6. Slide the cable collet against the
half-shells and clamp the shield (B)
between it.
7. Now you can put the assembled
cable considering the guidings (C)
into the connector housing.
If necessary, secure thread (D) with
adhesive (see page 18).
8. Screw back nut on the assembled
plug, counterhold spanner flat (E)
and tighten to spanner flat (F) with
ODU spanner wrench.
Caution! Consider tightening
torque (see page 18).
The assembly is finished.
