ODYS i-net MusicBox
6
EN
5 Installation
The device will start up automatically if you connect it to a power outlet.
Press the power button shortly to toggle between Stand By Mode and On.
Press the power button for about 4 Seconds to turn off the device completely.
The proper voltage for Internet Radio is AC 100V~240V/50-60Hz. Be sure to the voltage in your area
before plugging in the unit.
Make sure the internet environment is ready and the network setting is available
(a DSL Broadband Connection is highly recommended).
5.1 Wired Network Environment (Default Connection)
The default setting of network in your Internet Radio is DHCP.
This will use you’re broadband router to get a valide network address automatically.
(More network setting please check 7.4 Network)
The below illustrations shows a typical network environment.
Connect your i-net Music Box to your Broadband Router as shown.
Please take care that your Broadband Router acts as a DHCP Server.
This is the default setting of most of the available routers.
Please note that a network cable is not included!
If you want to listen audio contents from your PC, you can use Cross-over to connect your Internet Radio to
your PC directly.
i-net MusicBox
i-net MusicBox
