CONTINUED »
MENU SYSTEM
SETUP MENU
The SETUP Menu functions as both a detailed status display as well as a selection point
to change status and settings. It allows you to setup the Odyssey7Q and adjust settings for
monitoring and recording including the type of camera input, recording format, video cadence,
frame rate, audio source, timecode source and record trigger. Many of the controls are also
available by pressing other Upper Toolbar buttons. The SETUP menu is accessed by tapping
☼
then tapping
SETUP
.
☼
╚
ODYSSEY
SETUP
OUTPUTS
SET UP MONITORING / RECORDING
CAMERA:
SONY FS7/FS700
MONITOR->RECORD
4K RAW>UHD PRORES
∟
( ACTIVATED )
VIDEO CADENCE:
PROGRESSIVE/PSF
TIMECODE SOURCE:
SDI/HDMI
AUDIO CHANNELS:
2
AUDIO SOURCE:
SDI/HDMI
RECORD TRIGGER:
RECORD BUTTON
PROJECT RATE:
FOLLOWS INPUT
SETUP MENU OPTIONS
CAMERA:
Tapping status boxes brings up a list of selections for each. Choice of CAMERA determines
MONITOR -> RECORD selections for that camera. CAMERA also determines Trigger,
Timecode and LUT integration.
AVAILABLE CAMERAS:
Sony FS7/FS700
Sony (F3, F5 and F55 and others)
Canon (C500 and others)
ARRI (ARRI Alexa)
POV RAW (IndieCam and IO Industries)
Other (sundry HD video sources)
Panasonic
RED
Multi-Stream (up to 4 HD video sources, monitoring only)
MONITOR->RECORD
Displays options for the currently selected camera
(See the
MONITOR-->RECORD OPTIONS chart in APPENDIX (p59)
(for full list of
options in this menu selection)
19