CONTINUED »
MENU SYSTEM
SAFE EJECT
(ALL MODES)
Prompts a confirmation to Safely Eject one or both of the SSDs. This is the proper method
for dismounting and ejecting SSDs so that the files and directories can be closed properly.
SSD2 STATUS
(ALL MODES)
02:12
Displays record time available given current settings (HH:MM). Tapping button brings up
detailed information on SSD2 status.
REC/PLAY
(ALL MODES)
Displays current status as to whether Odyssey7Q is in RECORD or PLAY mode. Tapping
button toggles between modes. NOTE: Playback Mode changes the upper and lower tool
bars. See Play Mode, below.
CLIP METADATA
(ALL MODES)
CLIP0000
005_000
.MOV A
Displays current recording format. Tapping button brings up detailed information on
recording type and frame rates.
If a rented Record Option is in use, the remaining time
is noted here.
LAST TAKE BUTTON
(RECORD MODE ONLY)
LAST TAKE
00:00:05
650 FRAMES
Displays timecode start and elapsed time of last recorded take. Tapping button brings up
detailed information of the last take recorded.
AUDIO
(ALL MODES)
Displays audio levels. Tap button for Audio Display/Control settings.
AUDIO METERS SETTINGS
SHOW
(display audio levels as BARS or numerical VALUES)
BAR COLORS
(set yellow level to -20 or -18 dB)
METERS
(turn ON or OFF audio levels display)
AUDIO OPTIONS
AUDIO CHANNELS:
Currently locked to two channels. Future firmware
updates will allow up to eight audio channels.
AUDIO SOURCE:
Allows selection of audio input source.
SDI/HDMI (embedded in incoming signal)
ANALOG (analog 2-channel input via AUD IN port)
Currently available only for HD Apple ProRes recording.
HEADPHONE OUT(
d
B):
Volume adjustment of AUD OUT port. Control replicated
as HEADPHONE in OUTPUTS in
☼
MENU.
ANALOG MIX IN:
For analog audio input via AUD IN port, select between
STEREO UNBALANCED (two discreet channels) or
MONO BALANCED (one source to record over both
channels).
ANLG GAIN IN(
d
B):
Adjust analog audio input levels for AUD IN port.
27
