CONTINUED »
MENU SYSTEM
LOWER TOOL BAR
(RECORD MODE)
In addition to being a high quality recorder of multiple formats, the Odyssey7Q is also a
full-featured production monitor. The Lower Tool Bar activates and controls the monitoring
tools and image analysis functions.
OLED
GUIDE
LUT
FOCUS
ZOOM
00:12:16:72
FALSE
ZEBRA
WFM
HIST
HIDE
OLED
OLED
Tapping button brings up OLED monitor settings. Controls are for Brightness, Contrast,
Backlight and Color Gamut (REC709 or DCI P3). These controls are for the Odyssey7Q
OLED panel only, and will not affect the recorded signal or the signal from any of the
device’s outputs. The Odyssey7Q display is capable of presenting the full contrast and
color gamut of both the REC709 and DCI P3 standards.
Assuming a standard, properly attenuated video signal from the camera, the Odyssey7Q
defaults are 50% for brightness and contrast, medium for backlight and REC709 for Color
Gamut. Unless otherwise noted, any standard HD video source should be a REC709-
compliant signal, not DCI P3, which is for digital cinema displays. Additional controls will
be available in a future free firmware update.
GUIDE
GUIDE
Tapping button activates Frame Guides. Holding button brings up the Frame Guides
settings. Current choices are 1.85:1 and 2.39:1. Additional options including user-
adjustable settings will be available in a future free firmware update. The [GUIDE] button
will highlight in green when active and indicate current selected frame guide (1.85, 2.39,
1.33). The native aspect ratio of the HD video image is 16:9, or 1.78:1.
LUT
LUT
A Look Up Table (LUT) is a set of exposure, contrast and color offsets to adjust an image.
The Odyssey7 and Odyssey7Q offer LUTs to allow the flat LOG video signals from several
popular cameras to be changed into standard REC709 video color and contrast for
monitoring, while the recording remains LOG for greater color correction control in post.
On the Odyssey7Q, the RAW record options also feature monitoring LUTs. A future update
will allow programmable 3D-LUTs on the Odyssey7Q.
Tapping button activates chosen LUT. Holding button brings up the LUT options list. Note
that choice of CAMERA (under RECORD STATUS Button in Upper Toolbar) determines
available LUT options.
LUT OPTIONS:
None
ARRI (Log-C)
Canon (C-Log)
Sony FS700 (S-Log2)
Sony F3/Other (S-Log)
Sony F5/F55 (S-Log2)
Sony F5/F55 (S-Log3)
28