CONTINUED »
ACCESSORIES
TERADEK BATTERY PLATES
Convergent Design also makes battery plates that can also hold and power a pair of Teradek Bolt
video receivers along with the Odyssey7Q. Two camcorder batteries (one for the Odyssey, one for
the Teradeks) are used or a single large battery. These plates are shipped in kits that include short
SDI cables and power cables for the Odyssey and Teradeks.
Teradek battery plate for 2x Sony L-Series batteries
CD-OD-BOLT-SLPLATE
Teradek battery plate for 2x Sony U-Series batteries
CD-OD-BOLT-SUPLATE
Teradek battery plate for 2x Canon BP-9x Series batteries
CD-OD-BOLT-CBPLATE
Teradek battery plate for 2x Panasonic CGA-Series batteries
CD-OD-BOLT-PCGAPLATE
Teradek battery plate for IDX V-mount batteries
CD-OD-BOLT-IDXPLATE
Teradek battery plate for Anton Bauer 3-stud batteries
CD-OD-BOLT-ABPLATE
http://convergent-design.com/accessories/50-teradek-battery-plate-kit.html
ODYSSEY7/7Q SUN HOOD
The Convergent Design Odyssey Hood is a flexible three-sided sunshade for the Odyssey7 and
Odyssey7Q. It attaches to the side 1/4-20 mount sockets on the Odyssey. If there is another item
such as a mount that uses these side sockets, the Odyssey Hood’s bolts can be removed and the
other item’s bolts can be passed through the Hood into the Odyssey. The Odyssey Hood folds flat
for storage and can rest atop the Odyssey within the Odyssey Case. When the Hood is folded the
mounting bolts do not protrude long enough to make contact with any surface, so as not to scratch
the Odyssey screen in transport.
Odyssey7/7Q Sun HOOD
CD-OD-HOOD
http://convergent-design.com/accessories/88-odyssey7-7q-sun-hood.html
ODYSSEY ALUMINUM TABLE STAND
The Convergent Design Odyssey Aluminum Table Stand attaches to the Odyssey7 or Odyssey7Q.
While only five ounces, it is tall enough to protect the cables and connectors attached to the bottom
of an Odyssey. The design tilts back the screen for comfortable viewing while also centering the
weight over the stand for balance.
The stand can support an Odyssey alone or with any Convergent Design battery mount with full
clearance and stability. There is also a standard 5/8” socket with tie-down bolt to mount the stand
onto a standard light stand or baby pin. The stand also functions as a “chest offset” when an
Odyssey is worn with a neck strap so the operator doesn’t have to look uncomfortably straight down.
Odyssey Aluminum Table Stand
CD-OD-AL-TS
http://convergent-design.com/accessories/36-odyssey7-7q-aluminum-table-stand.html
45
