Reference/System
Series
TOYOTA Tacoma
Procedure
Issue A 09/15/15
Page | 8
Fig. 3-8
Fig. 4-1
Fig. 4-2
Fig. 4-3
3. Mount the 6.5” OEM Audio Plus speaker by
using the three 10mm bolts and re-install 6.5”
speaker connector.
(Fig. 3-8)
c. Reassemble door in reverse order - taking time
to ensure all clips are engaged. Failure to securely
reinstall door panel may result in rattles.
4. Prepping for subwoofer umbilical run
a. Remove the drivers side rear threshold by pulling
in an upward motion.
(Fig. 4-1)
b. Remove the drivers side front threshold.
c. Loosen seatbelt trim weather-stripping by hand
and remove carefully in an outward direction on
both the front and rear passenger side thresholds.
(Fig. 4-2)
d. Remove the lower seatbelt mounting bolt cover
and bolt (14mm).
(Fig. 4-3)
Socket 10mm
Socket 14mm
