Reference/System
Series
TOYOTA Tacoma
Procedure
Issue C 09/15/19
Page | 19
4. Position ampli
fi
er assembly so that the
rear bracket hooks on rear most spring
and front bracket arm rests on the under
seat front frame. The ampli
fi
er connector
receptacles will face the passenger side of
the vehicle.
(Fig. 8-15)
5. Use the provided 10mm bolts to secure
the ampli
fi
er bracket assembly to the
underseat frame.
(Fig. 8-16)
6. Attach the cable mounting clip to the open
slot on the ampli
fi
er bracket assembly.
(Fig. 8-17)
k. Route the Quick-Sync Wiring Harness radio
connectors and power wire towards the driver’s side
kick panel area. Leave the wires in the kick panel
fl
oor area for the time being.
(Fig. 8-18)
v
Fig. 8-18
Fig. 8-15
Fig. 8-16
Fig. 8-17
Socket 10mm
Cable Mounting
Clip
