background image

UNPACKING

After unpacking the unit, inspect carefully for any 

damage that may have occurred during transit. Check 

for loose, missing, or damaged parts. If any damage 

is observed, a shipping damage claim must be filed 

with the carrier. DO NOT use the OEMTOOLS

 Jump 

Starter if broken, bent, cracked or damaged parts 

(including labels) are noted. Any Jump Starter that 

appears damaged in any way, operates abnormally 

or is missing parts should be removed from service 

immediately. If you suspect that the Jump Starter 

was subjected to shock load (a load that was dropped 

suddenly, unexpectedly, etc.), immediately discontinue 

use until it has been checked by a factory authorized 

service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself 

and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in 

personal injury and/or damage to product or property. Please retain instructions for future reference.

 Operating Instructions and Parts Manual 

24475

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

customerservice@oem-tools.com

Thank you very much for choosing an OEMTOOLS

 Product!

For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:

Model: _______________ Purchase Date: ___________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product 

before you begin using it. This product is designed for certain applications only. OEMTOOLS

 cannot be responsible for issues arising 

from modification. We strongly recommend that this product is not modified and/or used for any application other than that for which 

it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first contacted 

customer service to determine if it can or should be performed on the product.

The following safety information is provided as a guideline to help you operate your Jump Starter under the safest possible conditions. Any tool 

or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following 

safety instructions are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions for 

the continued safe use of your tool. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone 

who uses the equipment understands and follows these safety instructions as well.

WARNING

EXPLANATION OF SAFETY SIGNAL WORDS

 

WARNING

:  Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION

:  Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION:

  Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may  

result in property damage.

NOTES:

 Provide clarity and helpful information.

1

5/17

2017 OEMTOOLS

12000mAh Li-Ion Jump Starter 

and Power Bank

Summary of Contents for 24475









Reviews: