background image

2

Operating Instructions and Parts Manual 

24475

5/17

2017 OEMTOOLS

12000mAh Li-Ion Jump Starter 

and Power Bank

 

IMPORTANT INSTRUCTIONS  

 

AND SAFETY RULES

1.  Know your tool. Read this manual carefully. Learn the tool’s 

applications and limitations, as well as potential hazards 

specific to it.

2.  Maintain a safe working environment. Keep the work area well 

lit. Make sure there is adequate surrounding workspace. Keep 

the work area free of obstructions, grease, oil, trash, and other 

debris. DO NOT use this product in a damp or wet location.

3.  Keep children away. All children should be kept away from the 

work area. Never let a child handle a tool without strict adult 

supervision.

4.  DO NOT operate this tool if under the influence of alcohol or 

drugs. Read warning labels on prescriptions to determine if 

your judgment or reflexes are impaired while taking drugs. If 

there is any doubt, DO NOT attempt to operate.

5.  Use safety equipment. Eye protection should be worn at all times 

when operating this tool. Use ANSI approved safety glasses. 

Everyday eyeglasses are NOT safety glasses. Dust mask, non-

skid safety shoes, hard hat or hearing protection should be used 

in appropriate conditions.

6.  Wear proper apparel. Loose clothing, gloves, neck-ties, rings, 

bracelets or other jewelry may present a potential hazard 

when operating this tool. Keep all apparel clear of the tool.

7.  DO NOT overreach. Keep proper footing and balance at all 

times when operating this tool.

8.  Check for damage. Check your tool regularly. If part of the tool 

is damaged, it should be carefully inspected to make sure 

that it can perform its intended function correctly. If in doubt, 

the part should be repaired. Refer all servicing to a qualified 

technician. Consult your dealer for advice.

9.  Keep away from flammables. DO NOT attempt to operate this 

tool near flammable materials or combustibles. Failure to 

comply may cause serious injury or death.

10.  Store idle tools out of the reach of children and untrained persons. 

Tools may be dangerous in the hands of untrained users.

11. Maintain tools with care.
12. Keep tools dry and clean.
13. Properly maintained tools are less likely to bind and are easier 

to control. DO NOT use a damaged tool. Tag damaged tools 

“DO NOT use” until repaired.

14. Check for misalignment or binding of moving parts, breakage of 

parts, and any other condition that may affect the tool’s operation.

15. If damaged, have the tool serviced before using. Many 

accidents are caused by poorly maintained tools.

16. Use only accessories that are recommended by the 

manufacturer for your model. Accessories that may be 

suitable for one tool may become hazardous when used on 

another tool.

17. Tool service must be performed only by qualified repair 

personnel. Service or maintenance performed by unqualified 

personnel could result in a risk of injury.

18. When servicing a tool, use only identical replacement parts. 

Use of unauthorized parts or failure to follow maintenance 

instructions may create a risk of injury.

19. Maintain labels and nameplates on this product. These carry 

important information.  If unreadable or missing, contact 

OEMTOOLS

 for a replacement.

20. Keep the power source clean, dry, and free from brake fluid, grease 

and oil.

21. Before use, read and understand all warnings, safety 

precautions, and instructions as outlined in the vehicle 

manufacturer’s service manual. It is beyond the scope of this 

manual to properly describe the correct procedure and test 

data for each vehicle.

22. Always perform vehicle service in a properly ventilated area. 

Never run an engine without proper ventilation for its exhaust. 

Stop work and take necessary steps to improve ventilation in 

the work area if you develop momentary eye, nose, or throat 

irritation as this indicates inadequate ventilation.

23. Engine parts that are in motion and unexpected movement of 

a vehicle can injure or kill. When working near moving engine 

parts, wear snug fit clothing and keep hands and fingers away 

from moving parts. Keep hoses and tools clear of moving 

parts. Always stay clear of moving engine parts. Hoses and 

tools can be thrown through the air if not kept clear of moving 

engine parts.

24.  The unexpected movement of a vehicle can injure or kill. When 

working on vehicles, always set the parking brake or chock the 

wheels.

25. Avoid accidental fire and/or explosion. DO NOT smoke near 

engine fuel and battery components.

26. The warnings, precautions, and instructions discussed in this 

manual cannot cover all possible conditions and situations 

that may occur. The operator must understand that common 

sense and caution are factors which cannot be built into this 

product, but must be supplied by the operator.

27. For safety purposes and the prevention of damage to 

expensive components, it is advised that the user have an 

understanding of basic automotive repair and a working 

knowledge of automotive systems.

28. We believe the information contained herein to be reliable. 

However, general technical information is given by us without 

charge and the user shall employ such information at their 

own discretion and risk. We assume no responsibility for 

results or damages incurred from the use of such information 

in whole or in part. Always refer to specific instructions and 

technical information supplied by vehicle manufacturer.

29. The manufacturer declines any and all responsibility for 

damage to vehicles or components if said damage is the 

result of unskillful handling by the operator or of failure to 

observe the basic safety rules set forth in the instruction 

manual.

30.  This equipment is intended only for professional use by personnel 

trained in performing the service functions for which it was 

designed.

31. In addition to these guidelines, always follow the 

manufacturer’s recommended procedures when servicing 

each unique vehicle.

32. To reduce the risk of battery explosion, follow these 

instructions and those published by the battery manufacturer 

and the manufacturer of any equipment you intend to use in 

the vicinity of a battery. Review cautionary markings on these 

products and on the engine.

Summary of Contents for 24475









Reviews: