UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed, a
shipping damage claim must be filed with carrier. DO NOT
use the OEMTOOLS
™
Cordless Screwdriver if broken,
bent, cracked or damaged parts (including labels) are
noted. Any Screwdriver that appears damaged in any
way, operates abnormally or is missing parts should be
removed from service immediately. If you suspect that
the Screwdriver was subjected to shock load (a load that
was dropped suddenly, unexpectedly, etc.), immediately
discontinue use until it has been checked by a factory
authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Cordless Screwdriver under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not
known or not followed. The following safety instructions are to provide the user with the information necessary for safe use and
operation. Please read and retain these instructions for the continued safe use of your service system. Failure to follow instructions
listed below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows these
safety instructions as well.
Operating Instructions and Parts Manual
24667
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
Thank you very much for choosing an OEMTOOLS
™
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with
this product before you begin using it. This product is designed for certain applications only. OEMTOOLS
™
cannot be
responsible for issues arising from modification. We strongly recommend this product is not modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT
use the product until you have first contacted customer service to determine if it can or should be performed on the product.
WARNING
:
This product can expose you to chemicals, including acrylonitrile, which are known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Explanation of Safety Signal Words
WARNING
:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES
:
Provide clarity and helpful information.
4V MAX* LITHIUM-ION
CORDLESS SCREWDRIVER
1
11/18
2018 OEMTOOLS
™
WARNING
* Voltage is measured without workload. Initial battery voltage
reaches a maximum of 4 Volts. Nominal voltage is 3.6 Volts.
