GENERAL SAFETY
The product is designed for use on regulated compressed
air lines or on air compressors where the air pressure
does not exceed the maximum pressure limit of the hose.
Failure to follow this may result in personal injury and or
property damage.
Do not release hose rapidly. Retracting hose could cause
injury or property damage. Maintain control of hose as it
retracts.
INSTALLATION
1. Using the reel mounting bracket as a guide, drill 4 pilot
holes into wood wall studs or work bench.
2. Attach hose real, using the screws provided or bolts
and washers.
2.
Make sure that the mounting will
support up to 55 pounds
3. Connect air supply to 1/4” M X M NPT inlet fitting.
4. Connect desired quick connect or tool to the
1/4” M X M NPT outlet fitting.
