3.2 Basic image functions
3-9
3.2.3
Binary reading
[A.3.3.2 CONTROL command / Control register A#1/B#1= B’xxxxxx0x’]
Following three parameters are available when binarizing the image. The 256 levels of the density at
each pixel is processed by Contrast and binarized by fixed Threshold (Density). When the White
level following is se ON, the white level of the CCD output follows the background of the document.
So this is useful for line art drawing but not for photograph.
Table 3.6 Parameter of Binarization
Parameter
Control register No.
value
Default
Binary reading ON
A#2/B#2
B’xxxxxx0x’
ON
8 step setting ON
A#19
B’xxxxxxx0’
set from operator panel
Light
Normal
Dark
A#1/B#1
B’xxxx00xx’
B’xxxx1000’
to
B’xxxx1100
to
B’xxxx1111’
256 step setting ON
A#19
B’xxxxxxx1’
Density *1
Light
to
Dark
A#20/B#20
X’01’
to
X’FF’
Set from
operator
panel
Contrast
Mostly soft contrast
Normal
Mostly sharp contrast
A#21/B#21
X’01’
to
X’80’
to
X’FF’
X’80’
Set from the operator panel
A#1/B#1
B’0xxxxxxx’
White level following ON.
The threshold follows the
background of the document.
*2
B’10xxxxxx’
White level
following
White level following OFF.
The threshold do not follow
the background of the
document.
B’11xxxxxx’
ON
*1
When the IPC-2D or IPC-3D is installed, the value varies along with the control of DTC mode or IPC
mode.
*2
3 mm from top of the document must be white or drop-out color (See section 2.6.5)
Summary of Contents for M3097DE
