Care & Maintenance
• When cleaning your cot, use a non-toxic, non abrasive cleaner. Mix a solution of water with a small
amount of a mild detergent. Apply to bed surface with a damp cloth.
• When moving the cot without castors assembled, always lifts the unit. Do not push or drag it to
avoid damaging the base.
• It is important that the humidity levels in the room be controlled from extremes of too much humidity
or too little. The bed should not be placed directly next to air-conditioning, outlets, fire places,
radiators, space heaters, humidifiers, or dehumidifiers. Exposure to extreme variations of
temperature and humidity can damage wood products.
• Keep the bed out of direct sunlight. UV rays may fade colors and in some cases darken them. It can
cause crazing or hair line cracks in the finish. White finishes will darken naturally over time and
exposure to direct sunlight will hasten this natural process along with some wood darkening; this is
not considered to be a quality defect.
• If you need to put your cot in storage for any period of time do not store it in a damp
or hot environment. Allow air flow around the furniture and do not stack anything on it.
Check List
• Always check the bed is free from damage before use. Do not use product if any damage is
present.
• Regularly check that all assembly fittings are always tightened properly and retighten as necessary.
After Sales Service
When you receive your Oeuf product, if you need assistance, spare parts or if you have any
comments with respect to any aspect of the goods, please contact by email your local distributor.
You can also visit our website at
www.oeufnyc.com
for latest product information.
5
Distributed in Australia by:
3 Feet High Pty Ltd
3/52 Buckley St.
Marrickville NSW 2204
Australia
+61 2 9045 7799
info@3feethigh.com.au
Made in Latvia for:
Oeuf LLC
119 8th Street, Suite 301
Brooklyn, NY 11215
USA & Canada
(800) 691-8810
help@oeufnyc.com
