Officine Gullo 2OGG 304FCU, Instructions For Installation And Use Manual

EN

10

6 - General Oven Information

Before using your range for the first time remove all packing 
and foreign materials from the oven. Any material of this sort 
left inside may melt or burn when the appliance is used.
Heat the empty appliance to the maximum temperature in 
order to remove any manufacturing residues which could affect 
the food with unpleasant odors.

Flashing Symbols or Numbers

Signals an incomplete action that is in progress (locking the 
door, preheat, etc.) or an incomplete setting expecting further 
input.

Beeps

Signals that more information must be entered or confirms the 
receipt of an entry. Beeps also alert the user to the end of a 
function or an oven fault.

Door lock

It’s displayed continuously when the door is locked. The symbol 
flashes when the latch is moving in order to lock or unlock the 
door. Do not attempt to open the door at this time. Door can be 
opened when the symbol no longer appears. “AUTO LOCK” 
appears when the door has been locked automatically due to 
self-clean mode.
“USER LOCK” is displayed when the door has been locked 
manually by the user, for example to prevent children from 
having free access to the oven cavity.
Hold both the 

+

 and 

-

 keys for 3 seconds. The latch will 

lock the door. Repeat the same operation to unlock.

Locking the keyboard

Hold both the keys indicated by “KEYBD. LOCK” legend for 3 
seconds. Commands are now locked and “SENS LOCK” will 
be displayed every time you touch any keys. Repeat the same 
operation for 3 seconds to unlock the keyboard.

Power Failure

After the power returns to the oven, the clock displays the time 
12.00

AM

.

Default Settings

The cooking modes automatically select a suitable temperature 
when the selector is in the preset position.
These can be changed when a different one is needed.
It’s also possible to set a user option in order to save the last 
used temperature for each cooking mode.

Failure Number Codes

These codes are displayed when the electronic control detects 
a problem in the oven or in the electronics.

Convection Fan

The convection fan operates during any convection mode. 
When the oven is operating in the convection mode, the 
fan will turn off automatically when the door is opened. The 
convection fan always runs during the preheat time.

Preheat and Fast Preheat

Whenever a cooking mode is set and the oven is heating, 
the “PREHEAT” writing appears in the temperature display: the 
vertical bar indicates, in four steps, when the oven reaches 
the 25%, 50%, 75% and 100% thresholds of the set-point 
temperature.
As soon as 100% is reached, the control beeps an “end of 
preheat” tone and the “PREHEAT” text disappears.
When it’s necessary to heat up the oven rapidly, a Fast 
Preheat mode is available: it uses the heating elements and the 
convection fan in a special way, in order to reduce the heating 
time as long as possible.
After having set one of the cooking functions for which the fast 
preheat is available, touch the 

P-HEAT

 key, the “FAST” text is 

shown in addition to “PREHEAT”.

As soon as the set-point temperature is reached, the control 
beeps an “end of preheat” tone and both “FAST” and 
“PREHEAT” texts disappear. The oven switches automatically 
to the desired cooking mode that was initially chosen: put the 
food inside now.