Officine Gullo 2OGG 304FCU, Instructions For Installation And Use Manual

EN

41

30 - Oven Finishes / Cleaning Methods

Part

Cleaning Method

A

Chrome Plated

Wash with hot sudsy water. Rinse thoroughly and dry. Or, gently rub with Soft Scrub®,
Bon-Ami®, Comet®, Ajax®, Brillo® or S.O.S.® pads as directed. Easy Off® or Dow® Oven
Cleaners (cold oven formula) can be used, but may cause darkening and discoloration.
Racks may be cleaned in the oven during the self-clean mode. However, chromed racks will lose 
their shiny 

fi

nish and permanently change to a metallic gray.

B

Fiberglass Knit

DO NOT HAND CLEAN GASKET.

C

Glass

Spray Windex® or Glass Plus® onto a cloth 

fi

rst then wipe to clean. Use Fantastik® or Formula 

409® to remove grease spatters.

D

Painted

Clean with hot sudsy water or apply Fantastik® or Formula 409® 

fi

rst to a clean sponge or paper 

towel and wipe clean. Avoid using powdered cleansers and steel wool pads.

E

Porcelain

Immediately wipe up acidic spills like fruit juice, milk and tomatoes with a dry towel. Do not use a 
moistened sponge/towel on hot porcelain. When cool, clean with hot sudsy water or apply Bon-
Ami® or Soft Scrub® to a damp sponge. Rinse and dry. For stubborn stains, gently use Brillo® or 
S.O.S. ® pads. It is normal for porcelain to craze (

fi

ne lines) with age due to exposure from heat 

and food soil.

F

Reflective Glass

Clean  with  hot  sudsy  water  and  sponge  or  plastic  scrubber.  Rub  stubborn  stains  with  vinegar, 
Windex®, ammonia or Bon-Ami®. DO NOT USE HARSH ABRASIVES.

G

Stainless

Always wipe or rub with grain. Clean with a soapy sponge then rinse and dry. Or, wipe with 
Fantastik® or Formula 409® sprayed onto a paper towel. Protect and polish with Stainless Steel 
Magic®  and  a  soft  cloth.  Remove  water  spots  with  a  cloth  dampened  with  white  vinegar.  Use 
Zud®, Cameo®, Bar Keeper

¶

s Friend® or RevereWare Stainless Steel Cleaner®, to remove heat 

discoloration.

H

Probe (if present)

I

Burnished brass

Clean probe by hand with detergent and hot water. Then rinse and dry.
Do not so or clean in dishwasher.

No synthetic protective varnishes have been used to obtain the special burnishing effect on the 
burnished brass details in order to avoid spoiling the beauty of the brass with an artificial 
patina.  The antique finish of the surface is the result of natural oxidation that has simply been 
accelerated.  All the natural antique finish brass surfaces can be cleaned with mild soap and 
warm water, accompanied by the use of an abrasive pad (the green color type used for 
washing dishes).  It is recommended that the metal be rubbed, uniformly applying light 
pressure, use caution as this will remove some of the patina if rubbed excessvily.  
The brass details should then be dried.  Do not use metal polish as this is suitable not to clean 
the antique finish and could result in loos of the color and patina. Oxidation that may appear 
over time on the burnished brass surfaces is a normal characteristic of our craft metal working 
processes.

L

Chrome plated brass

No synthetic varnishes have been used to otain the special polish on the chromed plated brass 
details in order to avoid spoiling the beauty of the chrome with an artificial patina.  All the 
chromed surfaces should be clean as needed with a warm water and mild soap and  a soft 
cloth or micro-fiber. Do not use abrasive pads.

M Satin finish nickel

plated brass

No synthetic varnishes have been used to obtain the special nickel-plating on the satin finish 
nickel-plated brass details in order to avoid spoiling the beauty of the nickel-plated, satin 
finished solid brass with an artificial patina.  All the nickel-plated and satin finished brass 
surfaces should be cleaned, where necessary, with a soft cloth or micro-fiber cloth, combined 
with a neutral detergent, if required.  Do not use abrasive pads.

N

Brushed steel

All the brushed steel surfaces should be cleaned using degreasing products or products 
specifically designed to be used on steel and, where necessary, extra-fine steel wool.

O Varnished surfaces

All the varnished surfaces should be cleaned using a mild soap and, where necessary, a soft 
cloth or micro-fiber cloth.  Do not use abrasive pads or any other chemical products