Officine Gullo
12
CLEANING AND MAINTENANCE
Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a
dry cloth. Do not use abrasive or corrosive detergents.
All residues of food must be removed from the hotplate with the proper spatula. The surface must be cleaned well
and then greased with a film of vegetable oil. Remove the drip pan, empty it and wash it carefully.
General cleaning guidelines:
Wash surfaces gently with a soft damp cloth; use a neutral liquid soap with water for daily cleaning. Rinse completely
with water, dry any overspray. Never use an abrasive material such as a brush or scouring pad to clean surface. The
use of abrasive cleaners, cleansers or disinfectants will damage the surface finish and void the warranty.
We also recommends the general practice of spot testing all cleaning agents on an inconspicuous area prior to
applying.
We suggest a semi-annual wax routine using a high quality clear carnauba paste wax to extend the life of a living
finish. This will keep the finish close to its original form and minimize the appearance of use. The use of polishing
agents can damage finish and void the warranty.
Note that prolonged contact with certain items such as citrus fruit juice, salt, vinegar, mustard, pickles, mayonnaise,
anti-bacterial soap and wines on your surface for prolonged periods will also alter all surface finish.
NEVER USE:
•
Steel wool pads
•
Bleaches containing hypochlorite
•
Silver dip cleaners or polishes of any type.
Cleaning burnished brass surfaces
The antiquing finish of the surface (Burnished Brass) is the result of natural oxidation that has been accelerated and
it is a “living finish”. Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not
cared for properly.
The unique characteristic of these finishes is that they wear and age over time. Essentially, the finish replicates what
nature would do to the surface material naturally when exposed to the environment.
These products will generally tend to darken slightly on the areas that are infrequently touched and lighten or highlight
on the areas that are contacted on a consistent basis. Soaps, acidic fluids, and astringent cleaners can damage
the finish. Avoid using abrasive pads, sponges, or cloths to clean the product. Do not allow water spots to dry on.
Cleaning chromed brass surfaces
This finish is achieved by chrome plating solid brass and it is a “living finish”.
Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not cared for properly.
This durable finish will not change if the general cleaning guidelines are followed.
Please follow the general cleaning guidelines to keep this finish close to its original form and minimize the appearance
of use.
Cleaning nickeled brass surfaces
This finish is achieved by nickel plating solid brass and it is a “living finish”.
Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not cared for properly.
Oxidation that may appear over time on the nickel plated brass surfaces is a normal characteristic of this living
finish. Please follow the general cleaning guidelines to keep this finish close to its original hue and minimize the
appearance of use.
13
Officine Gullo
Cleaning power coated surfaces
Our electrostatic powder coating finish is what you see on all of the colored (painted) areas of our products, applied
at our factory by a standard process and heat cured in special kilns.
This finish is very durable and strong please follow the general cleaning guidelines to keep this finish close to its
original form and minimize the appearance of use.
Cleaning brushed stainless steel
Our high-quality brushed stainless steel is resistant to stains, rust and corrosion. Is made of ultra hi-gauge stainless steel
that is being brushed to provide you with the unique patina finish only found in our products. Although our products
are virtually indestructible, however scratches can occur.
Everyday maintenance is simple, by wiping it down with a damp cloth and soapy water. Never use abrasive pads
or chemical products.
Scratches
Scratches on stainless steel surfaces aren’t always bad. In fact, our brushed stainless steel finish is accomplished by
millions of little scratches. But in the event that you have a deep scratch that you want to care for, the surfaces can
always be re “brushed” using a hand held Orbital Sanding machine, with a 3M Maroon pad.
Orbital sanding
machine
3M Maroon Pad
Stains and rust
Any rust that appears on stainless steel is the result of iron particles coming from external sources. If you want to
remove any rust stains from your products, use a cleaning agent containing oxalic acid. Always use mild, non-
abrasive cleaning agents to remove stubborn stains from your stainless steel and make sure you thoroughly rinse
away any cleaning liquids once finished cleaning your stainless steel.
NEVER USE:
Steel wool pads
Stainless steel cleaners
Bleaches containing hypochlorite
Silver dip cleaners
Leaving foods like citrus fruit juice, salt, vinegar, mustard, pickles and mayonnaise on your surface for prolonged
periods can cause pitting and corrosion.
WHAT TO DO IN THE EVENT OF A BREAKDOWN
Disconnect the appliance and notify your authorized service center or call our main line at
800 620 7490.
