7
Officine Gullo
USER MANUAL
INSTRUCTIONS FOR USE
It is advisable that the initial installation and setting up of the chicken-spit is carried out by a reliable engineer.
It is important to follow the setting up procedure exactly:
Press switch A to light the cooking chamber.
Press the gear-motors switches (B) to start them for the spits rotation.
Regulate the working of the resistances using the hand grip D. The regulators
of the resistances (Infinit control) have the function to change the starting time
of the resistances used for the heating of the oven. Every value corresponds
to one unity, until the 10 unities are reached. If at this value the hand grip is
turned ulteriorly, we return to 0 (resistances off). Every unity corresponds to a
certain number of seconds in which the resistances remain on; for the rest of the
unities the resistances remain off. The value corresponding to the starting times
of the resistances can be changed at any moment. Working is signalized by the
relative pilot lamps C.
Positioning the regulators on the MAX position the heating elements work
continuously.
Turning again the handle you return to 0 (heating elements are off).
Each energy regulator corresponds to a cooking spit. The regulators position is
in sequence with the spits position.
The chicken-spit is provided with an appliance which does not allow the working
of the heating elements when gear-motors are off, in order to avoid the chickens
burning.