21
Officine Gullo
CLEANING SATIN FINISH NICKEL-PLATED BRASS SURFACES
No synthetic varnishes have been used to obtain the special nickel-plating on the satin
finish nickel-plated brass details in order to avoid spoiling the beauty of the nickel-
plated, satin finished solid brass with an artificial patina. All the nickel-plated and
satin finished brass surfaces should be cleaned, where necessary, with a soft, possibly
micro-fiber cloth, combined with a neutral detergent, if required. Do not use abrasive
pads.
CLEANING THE VARNISHED SURFACES
All the varnished surfaces should be cleaned using a neutral detergent and, where
necessary, a soft, possibly micro-fiber cloth. Do not use abrasive pads or any other
chemical products.
CLEANING BRUSHED STEEL SURFACES
All the brushed steel surfaces should be cleaned using degreasing products or products
specifically designed to be used on steel and, where necessary, extra-fine steel wool
or extra-thin sandpaper.
WHAT TO DO IN THE EVENT OF A BREAKDOWN
Turn off the gas tap and notify the after sales service.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT
GOING TO BE USED FOR SOME TIME
Turn off the gas tap and clean the appliance as specified above.
MAINTENANCE (only for qualified personnel)
Any kind of maintenance must only be done by qualified personnel. Before carrying
out maintenance,remove the plug or switch off the switch above the appliance.
