19
Officine Gullo
LIGHTING AND REGULATING GAS OVEN BURNER
To light, turn the knob to the left from position “0” to the
symbol (see figure);
keep it pushed down and press the button with the symbol until
the gas lights.
It is possible to check the flame through the inspection hole on
the oven floor (bottom); after a few seconds, release the knob. If
the flame goes out, repeat the operation. Turn the knob into the
position of the desired temperature.
To turn off the oven, turn the knob to the right, into position “0”
Attention!
When the oven is on, the door must not remain open
because it could heat and damage the knobs.
LIGHTING AND REGULATING THE ELECTRIC OVEN
Turn the control knob to the right and set the temperature wanted.
To turn the oven off, turn the knob to the left to position 0.
To turn the oven on, turn the selector knob (see figure) to the right
or left into one of the following positions
Top + bottom heating element
Bottom heating element
Top heating element
Caution:
when the oven is on the door must be kept shut otherwise
the knobs and protection sheet could get hot and be damaged.
