Ofna Racing 9.5 MBX, Instruction Manual

2. Pull down piston, attach pressure top
    and shock oil overflow with tissue 
    paper. 

SHOCK ASSEMBLY

FILLING THE SHOCKS WITH OIL

ASSEMBLY OF THE SPRING

1. Pull down piston and pour oil into
    shock cylinder. Remove air bubbles 
    by slowly moving piston up and down.

3. Tighten up shock cap.

*Move Slowly.

*Leave 3mm. 

OIL

Oil Seal

32237
7mm R-Ring

* Push 6mm ball joint
   into ball end.

2.6 x 5mm
Washer

40069
Black
Shock  Spring

40063
Spring Holder

OPTION:
40063 - CNC Alum Spring Holder, Orange

30411
6mm Ball  

32033
Pressure Top

40093
Shock Cap
Hard Coated

*

 Fit into the groove.

* Assembly 2 pieces of the 
  shock shaft for front and
  rear.

40054
Short Shaft

40055
Short Shaft

* Long shaft  
          for rear.

 down.

UP

* Be careful not to damage shock shaft.

* Short shaft   
          for front.

 Make a PAIR for rear

4. Assembly the dust cover.

* Cut 6mm for front.

40060
2.5mm
  Nylon Nut

32235
Shock
    Piston

40076
Shock 
   Cylinder

40077
Shock 
  Cylinder

32237
1mm
    Washer

32237
2mm
   Washer

 Make a PAIR  for front

Fit the O-ring into groove.

49041
Spring 
   Adjuster,
Orange

49041
Spring 
   Adjuster,
Orange

J-47C
  Spring Adjuster....4

40059
14.7mm
    O-Ring

32237
3.5mm
   O-Ring

40058
Shock Shaft
   Dust Cover

32235
Shock Piston.........4

40059
14.7mm O-Ring....4

32237
1mm Washer.............4

32237
2mm Washer..........4

40060
2.5mm Nylon Nut........4

40056
Shock Plastic
    Rod End

40056
Shock Plastic
    Rod End

40052 - Front Shock Set
40053 - Rear Shock Set

OPTION:
40069 - Black, Stock, Spring Set
40070 - Green, Soft Set
40071 - Blue, Med. Set
40072 - White, Hard Set

APPLY OIL TO SHOCK BODY 
BEFORE INSTALLING COLLAR

3 x 20mm
Cap Screw

35313
3mm
Nylon Nut 

Plastic 
    Bushing

36610
Shock Upper Fixing

36610
Shock Upper Fixing

36610
Shock Support.....2

36610
Shock Support.....2

3x25mm
Cap Screw

3 x 20mm
Cap Screw

3mm
Nylon Nut 

Plastic 
    Bushing

3x25mm
Cap Screw

ASSEMBLY OF THE FRONT SHOCK ABSORBER 

ASSEMBLY OF THE REAR SHOCK ABSORBER 

Assembly of the right and left hand side 
are the same.

Assembly of the right and left hand side 
are the same.

M3 
Nylon Nut..........2

M3 
Nylon Nut..........2

3 x 20mm 
Cap Screw..........2

3 x 20mm 
Cap Screw..........2

3 X 25mm 
Cap Screw..........2

3 X 25mm 
Cap Screw..........2

* Take the plastic bushing 
   from the shock plastic 
   parts tree.

ASSEMBLY OF THE TIRES AND WHEELS

INSTANT
    GLUE

* Apply instant glue into
  the groove of the wheel.

86062
      X  Equal  Pin
      Tire  

81095
Inner Sponge

86035
     wheel