FRONT TOE-IN AND TOE-OUT SETTING
Firm rear suspension, over steering.
Soft rear suspension, under steering.
FRONT AND REAR SHOCK ANGLE SETTING
Firm front suspension, less steering.
Soft front suspension, more steering.
FRONT AND REAR CAMBER ANGLE SETTING
-
-
-
-
+
+
+
+
Turnbuckle
SETTING GUIDE
Negative
Negative
Positive
Positive
12
Soft
Firm
1 2
Soft
Firm
Adjust the length of the front steering rod to change the toe angle.
Making the steering rod longer will make the front tires become
toe-in.
Response will be slower and will over steer.
Making the steering rod shorter will make the front tires become
toe-out.
Response will be quicker and will under steer.
We recommended adjusting the front toe-out to 1.5 degrees.
Adjust the length of the rear hub (12mm ball/rear) to change
the toe angle.
Making the 12mm ball longer will make the rear tires toe-in.
Response will be under steer.
Making the 12mm ball shorter will make the rear tires toe-out.
Response will be over steer.
We recommended adjusting the rear toe-in to 2 degrees.
Use a 2.5mm allen wrench to adjust toe-in for front and rear.
(Front)
(Rear)
Note: Place the model car on a flat surface. Raise the chassis to it's maximum clearance
before the wheels leave the ground.
Adjust the length of the front and rear upper arms so that the wheels are right angles to the
ground.
The front camber adjustment can be made by moving the 14mm
steering ball at the front upper arms on knuckles, clockwise or
anticlockwise.
We suggest using 1.5 degrees of negative camber for the front
.
(FRONT)
(FRONT)
(REAR)
(REAR)
Adjust the length of the turnbuckle on
can be change the rear camber.
We suggest using 2 degrees of negative camber for the rear.
the rear upper arms
•Use 2.5mm hex wrench
to adjust upper arm ball
in front.
TOE-IN
TOE-OUT
NEUTRAL POSITION
Steering Rod
REAR TOE-IN
2.5mm Allen
Wrench
TOE-OUT
REAR TOE-IN
Soft
Firm
1
2
1 2 3 4
Soft
Firm
Summary of Contents for DM-ONE-SPEC e
Page 1: ......
Page 2: ......
Page 27: ...58 MOUNTING THE BODY SHELL 31159 31159 ...
Page 30: ......
