4x4mm
Set Screw
4x4mm
Set Screw
ASSEMBLY OF THE DIFFERENTIAL CASE
40006
Cap Joint
40006
Cap Joint
36053
8x16mm
Ball bearing
36053
8x16mm
Ball bearing
36053
8x16mm
Ball bearing
36053
8x16mm
Ball bearing
40010
2.5x13.8mm
Pin
40010
2.5x13.8mm
Pin
40010
2.5x13.8mm
Pin
40010
2.5x13.8mm
Pin
40009
P6 O-Ring
40009
P6
O-Ring
40009
P6
O-Ring
40009
P6
O-Ring
40012
6x15mm
Washer
40012
6x15mm
Washer
40012
6x15mm
Washer
40012
6x15mm
Washer
40003
Diff. Case
40003
Diff. Case
40005
Break
Cap Joint
40005
Break
Cap Joint
(Builds one differential for Center)
40004
Diff. Gear
(Large)
40004
Diff. Gear
(Large)
40004
Diff. Gear
(Large)
40004
Diff. Gear
(Large)
40004
Diff. Gear
(Small)
40004
Diff. Gear
(Small)
40004
Diff. Gear
(Small)
40004
Diff. Gear
(Small)
(Builds one differential for Center)
40002
Large
Bevel Gear
40002
Large
Bevel Gear
40011
Diff. Gasket
40011
Diff. Gasket
3x12mm
Flat Head
Tapping Screw
3x12mm
Flat Head
Tapping Screw
40001
47T
Spur Gear
40001
47T
Spur Gear
*Use 6x15mm washer
to adjust the gear mesh.
*Use 6x15mm washer
to adjust the gear mesh.
Note: It is very important to add
or remove the #30779 washer if
the gear mesh is too tight or
too lose.
( Builds two differentials for front and rear.)
30779
4 x 10mm
washer
30779
4 x 10mm
washer
30779
4 x 10mm
washer
30779
4 x 10mm
washer
30773
4mm
Cross pin
30773
4mm
Cross pin
* Apply diff. gear grease to the
differential during assembly.
* Fill the diff. the case to
approx 70% with grease.
ASSEMBLY OF THE DIFFERENTIAL GEAR
OPTION: #49001 HD STEEL GEAR
SET, INSIDE DIFF.
OPTION:
#49016 SPUR GEAR 50T, HD
#49030 SPUR GEAR 50T, HD SPECIAL
#49032 SPUR GEAR 51T,HD
94034
94034
94020
94020