9
CHECKING YOUR DUAL RATE
•To Check Your Dual Rate:
1. Turn your radio
“ON”
then turn
“ON”
your vehicle.
2. Check your steering on your radio by turning left and right several times.
3. Now turn your steering wheel all the way to the left or right whichever you choose
and hold it while pushing the
“DEC”
button ( see fig. 1) on the
“ST-DR”
and
hold it down, you should see that the wheel on your vehicle decrease in radius
(see fig. 2) and that the
LED
on
“ST-DR”
will start blinking
Green
and turn to a
blinking
Red
indicating it is at 0% or minimal steering radius
.
4. To increase the dual rate turn the wheel left or right all the way and hold it while
pushing the
“INC”
button this will increase the turning radius of the and the
LED
on
ST-DR
will start blinking
G
reen
and turning to the
FIRST B
linking Red
indicating
that the
“Dual Rate”
is at 80%, Holding the increase button past the
FIRST Blinking
Red
will turn to
Blinking Green
again then to the
SECOND
Blinking Red
indicating
your
“Dual Rate”
is at 100%. When running your vehicle try to run the
“Dual Rate”
at maximum radius (100%). Then if you have too much steering then decease as
needed.
%
100
0%
00
1
%
ST.DR
INC
DEC
ST.D/R
DEC
INC
ST. D/R
FIG. 1
0%
0%
%
10
0
0
%
1
0
100
%
0
1
0%
FIG. 2
FIG. 3
FLASHING
