carolina.ofs.com
800.763.0212
imagine a place®
Mechanical lock instructions
Assigned user mechanical dial lock
The assigned user dial lock is ideal for users who keep the same storage over a period of
time, for example personal storage units in office environments. When a new user takes
possession of the storage unit, he or she will enter a personal code of their choice. This
code remains valid until changed by the user.
1. Code should be showing “0 0 0 0” and knob should be in locked position. Press
the programming pin (small button to the right of the key hole) into the knob using
something like a ball point pen.
2. With the pin held down, rotate the knob by approximately 20° until the arrow at the base of the knob is aligned with
the red triangle on the lock case. Release pressure on the programming pin.
3. Set the code you would like to use.
4. Turn the knob back to the closed position. Then turn the knob clockwise to the green area on left. The code should
scramble back to “0 0 0 0”.
5. Now the lock is ready to use. To lock door. Turn knob counterclockwise to the red lock area on the right. To open door,
enter your code and turn knob clockwise to the green area on left.
6. To change code, make sure it is showing your personal code and follow the same instructions.
Shared user mechanical dial lock
The shared user dial lock is ideal for one-time use of storage, for example guest lockers or for lockers in public areas.
The function is similar to a hotel safe. A user occupies the locker and enters a personal code of his choice to lock the
storage. To retrieve his belongings, the user enters the programmed code, which allows the lock to be opened while
simultaneously deleting the code. The lock is now ready for the next user.
1. Code should be showing “0 0 0 0”. Door is unlocked with knob pointing towards green area on left.
2. Enter your personal code.
3. Turn knob counterclockwise to red lock area on right. Code should reset to “0 0 0 0” and door will lock.
4. To unlock, enter your personal code and turn knob clockwise to green area on left. Door should unlock and code
should reset to “0 0 0 0”. Now the lock is completely reset and ready for next user.
The scramble feature provides highest security in combination with user convenience - whenever the dial lock is
operated, the dials are scrambled to “0 0 0 0” automatically. This disguises the programmed code without any additional
action by the user.
