carolina.ofs.com
800.763.0212
imagine a place®
Electrical lock instructions
Shared user electrical lock
The shared user lock is ideal for one-time use of storage, for example guest lockers
or for lockers in public areas. The function is similar to a hotel safe. A user occupies
the locker and enters a personal code of his choice to lock the storage. To retrieve his
belongings, the user enters the programmed code, which allows the lock to be opened
while simultaneously deleting the code. The lock is now ready for the next user.
1. Ensure door is unlocked. If not, enter factory default code of “0 0 0 0”.
2. Close door and enter your one time use code. Press the Lock button.
3. When you are ready to open door, enter your code and press the Unlock button.
4. Door should unlock and your code is wiped. Now the lock is completely reset and ready for next user.
Programming self-lock mode
There is a setting with Stealthlock that you can set so whenever the door or drawer is shut it automatically locks.
1.
On receiver latch inside of cabinet, use something like a ballpoint pen to push bottom Learn Button until the LED light
above it begins a
three
blink pattern in yellow. Release.
2. Enter the Supervisor pin code and press the Unlock button.
3. Enter 2222XX (XX represents the amount of seconds you want before the door automatically locks - this number can
be anywhere from 2-60 seconds).
4. If successful, the green LED light on the Receiver Latch will flash twice. Enter 9999 and then the Lock button to exit
the Learn Mode.