Riff Tables by OFS | Assembly Instructions
Page 4 of 7
Work Table Assembly Instructions
STEP 2
1. Fit Cross Rail Angled Tennons into Mortise on bottom of Base Rail.
2. Straight Tennons fit on top and bottom of Center Base Rail
(96" long tops only).
3. Secure Angled Tennons with #8 x 1 ½" Pan Head Screws (HK-103).
4. Secure Straight Tennons with (2) #8 x 2" Pan Head Screws (HK-102).
Straight
tennon
Align holes with
holes in base rail
Angled tennon
Mortise
96" long tops only
Fit Cross rail angled tennons into motise on bottom of base rail.
•
Straight tennons fit on top and bottom of center base rail (96" long tops only).
•
Secure angled tennons with # 8 x 1 1/2" pan head screws (HK-103).
•
Secure straight tennons with (2) #8 x 2" pan head screws (HK-102).
•
Series:
Part #:
Verve X1
Align holes with
holes in Base Rail
96" long tops only
Angled Tennon
Mortise
Straight
Tennon
