Page 5 of 7
Riff Tables by OFS | Assembly Instructions
Work Table Assembly Instructions
STEP 3
1. Install Braces by inserting Tennon into Mortise.
2. Bottom edge of Brace should rest flush on Cross Rail.
Mortise
Tennon
Cross rail
Brace
Insall Braces by inserting tennon into mortise
•
Bottom edge of Brace should rest flush on Cross rail.
•
Secure Brace to Mount plate with
#8 x 2" pan head screws (HK-102).
Secure Brace to Cross rail with
#8 x 2 1/2" pan head screws (HK-101)
Series:
Part #:
Verve X1
Cross Rail
Secure Brace to Cross Rail with
#8 x 2 ½" Pan Head Screws (HK-101).
Secure Brace to Mount Plate with
#8 x 2" Pan Head Screws (HK-102).
Brace
Mortise
Tennon
