Step 28:
Align (2) Bolts on (K - 1 9) and (2) Bolts on (K - 0
6) to the holes in (K - 2 3). Attach (K - 2 3) using (4)
Nuts. Align (2) Bolts on (K - 2 0) and (2) Bolts on (K -
0 7) to the holes in (K - 2 3). Attach (K - 2 3) using (4)
Nuts.
Step 29:
Insert (1) Bolt each into the underside of (K - 0 6) and
(K - 0 7), this Bolt will be used in a later step.
Step 30:
Insert (2) Bolts into the end holes of (K - A 0 7) and
attach (2) Nuts. Slide the (K - A 0 7) into the under-
side of (K - 0 6) and (K - 0 7). Tighten the Bolts to the
Assembly.
Summary of Contents for OGAL-46
Page 1: ......
