43 52
43 52
Attach the corner brackets to the
corner and roof beams. Lay the
bracket above the two beams and
secure loosely.
STEP
1
Bolt the floor bar to the inside of
the corner beams, securing at
each corner.
STEP
2
Secure the support poles to the
outer side of the floor bar. Attach the
diagonal supports to the inside of
the floor bar and support poles, all
with the same bolt.
STEP
3
Slide an extra bolt into the groove
of the support pole. Then bolt the
top of the support poles to the
outside of the roof beams using
another bolt.
STEP
4
On the inside of each corner bracket,
attach the diagonal supports to the
lowest bolt and the horizontal
support to the second-to-lowest bolt.
Open the bolts, position the
supports, and refasten the bolts.
STEP
5
Lastly, use the extra bolt in the
grooves of the support poles to
secure the horizontal support
across the two support poles.
STEP
6
Follow the steps below to assemble the Back Wall.
NOTE:
Each step applies to both relevant corners/supports.
13
21
8
05
8
8
1
05
13
1
22
21
16
22
8
16
43 52
43 52
PAGE 11
01
04
43 52
